JDSU OTPDR2001SR1, 1310nm, 10 Gb/s MSA Short Reach Multirate Transponder

JDS Uniphase 10 Gb/s PH1 Series transponders are intended for 1550 nm system applications with reaches of up to 80 km. The series includes three different transponders for SR2 (25 km), IR2 (40 km), and LR2 (80 km) TDM or DWDM applications. Each transponder accepts 16 bits of parallel digital data and converts it to a 10 Gb/s NRZ modulated optical signal. It also accepts a 10 Gb/s NRZ modulated optical signal and converts it into 16 bit wide parallel digital data.

The PH1 series offers low DC power dissipation and is available in a larger footprint (3.5 x 4.5 x 0.53 inches) package, depending on system thermal performance requirements. The transmit design uses an Electro-Absorptive Modulated Laser (EML) which, depending on the configuration, produces an average output power of between -4 dBm to 2 dBm (EOL). A PIN (-17 dBm typical sensitivity) or APD (-24 dBm typical sensitivity) receiver is available, based on system configurations.

JDS Uniphase PH1 Series transponders are designed to support the following data rates: 9.953 Gb/s (SONET), 10.3125 Gb/s (Ethernet), 10.664 Gb/s (FEC Encoded), 10.709 Gb/s FEC, or 11.09 Gb/s EFEC. They meet all applicable SONET/SDH standards.

Key Features

Three configurations supporting SR2/IR2/LR2 applications Supports dense wavelength division multiplexing DWDM) applications (without wavelocker) Microprocessor controls to support I2C Integrated 16:1/1:16 mux/demux Low power consumption: 4.8 W typical, 6.8 W maximum for TDM applications 70 °C maximum operating temperature High sensitivity PIN or APD receivers SONET, FEC, Ethernet and Multirate Capable Versions Forward, counter and line timing clocking modes Applications

Telecommunications Metropolitan Area Networks Subscriber loop Intra-office SONET/SDH High bit-rate data communications Compliance

Telcordia GR-253-Core